DescriptionUltra Anchor RingThe Ultra Marine Anchor Ring brings together two unique functions in one product. It is designed to replace a chain or rope weight, also known as a Kellet. When anchoring with a limited scope, such as in a busy anchorage or a limited anchorage area, the Ultra Marine Anchor Ring increases safety by adding weight to the anchoring system. Adding extra weight to the chain reduces the vessel swing area and works as a shock absorber, thus improving comfort at the anchor by reducing boat movement.Moreover, the Ultra Marine Anchor Ring is an important recovery tool. In conditions where entering the water is not possible or preferable, such as in cold water, rough sea conditions, or with dangerous wildlife around, it becomes even more significant. If you are unlucky and get caught on the bottom, using the Ultra Marine Anchor Ring can assist in your recovery prospects.VIDEOS OF ULTRA ANCHOR RINGBoth an Anchoring Tool and an Anchor Retrieval Tool Ultra Anchor Ring Animation VideoUltra Anchor Ring Animation VideoUltra Anchor RingRope DetailsYou might think that the diameter of the rope would be strong enough to carry the weight of the ring alone, but keep in mind that you may have to use a little extra force to loosen an anchor that is stuck. Also, if you go for a line that is too thin, it could make lowering the ULTRA Anchor Ring more difficult. We recommend a minimum of 5/16″ rope for UAR27/60, 3/8″ for UAR45/100, and 1/2″ for UAR80/176.The length of the rope needs to be a little less than the depth of the water. This way, the ring doesn’t sit on the sea bottom or hug the chain.The type of rope is not that important. If you have a UL-D 40/130 at the bow of your boat, it is best to use it with the ULTRA Anchor Ring. Or if you have an ULTRALINE at the stern of your boat, you can even use it by pulling its line from the stern to the bow.If you want to use a separate rope, you can use any rope with the above-recommended size and length.
